SmartView Display 2100-SVD
The 2100-SVD SmartView Display integrates with the SmartView Controller. It displays 5/16″ text from a call center on a 5″ screen.
Elevator Phones, Communication & Detection
SmartView 1 Two-Way Visual Communication
The SmartView 1 Two-Way Elevator Visual Communication System was designed to meet the ASME A17.1 and B44 2019 code requirements for visual communication and requirements for IBC 2018. This visual only system provides the hearing impaired with an improved method to communicate with rescue services. Our system allows for the monitoring company is able to receive a standard elevator call, and, if no answer, utilize our system to view the elevator. Choose from OEM Components, Lobby & Machine Room Systems or Complete Field Mod Systems.
SmartView Controller 2100-SVC
The 2100-SVC SmartView Controller is the brains of the system that connects the software, display, buttons, and camera for a fully functional system.
The board is affixed to a mounting plate.
SmartView Controller 2100-SVCB
The 2100-SVCB SmartView Controller is the brains of the system that connects the software, display, buttons, and camera for a fully functional system.
The board is mounted inside of a box that can be mounted to the elevator car.
SmartView Behind the Panel Camera 2100-SVCF
The 2100-SVCF camera is mounted behind the panel. A 170° wide angle lens allows the call center to see the entire elevator car during an emergency.
SmartView 2 Two-Way Visual Communication
The redesigned SmartView 2 system simplifies your building compliance with ASME A17.1 2019/CSA B44-19 and IBC 2018 requirements for two-way elevator visual communication, providing the hearing impaired with an improved method to communicate with rescue services
- All-in-one Design: Streamlines installation by integrating a phone (microphone and speaker), display, and camera into a single unit, ensuring fewer components and a more straightforward installation
- Flexible Programming: Configure the system on-site using laptop or phone
- Safe and Secure: With increasing concerns about security and privacy, the SmartView 2 System prioritizes encryption and safety
- Cost-Effective Installation: The system’s design reduces components and wiring (by transmitting data and audio over a single twisted pair of wiring), saving both time and money
Machine Room Unit 7100
The SmartView 2 Machine Room Unit provides the conversion from twisted pair to ethernet and POTS line and power to the SmartView 2 Elevator unit.
This is essential to the system for connectivity of audio / video to the outside world and power. The requirement of the system is one SmartView Machine Room unit to one SmartView 2 Elevator unit, without both in a system the SmartView 2 will not function.
Elevator In Car Unit 7200
The SmartView 2 Elevator Unit is a combined audio and visual communication system providing complete ADA compliance within the elevator car.
The unit comprises of a display, camera, microphone, and speaker all within one compact housing. The SmartView 2 Elevator Unit also has inputs for the emergency call button and yes / no buttons to allow a trapped passenger to answer text messages that are displayed on the screen
Note: The 7100 Machine Room Unit is required to complete the installation of this unit
The unit comprises of a display, camera, microphone, and speaker all within one compact housing. The SmartView 2 Elevator Unit also has inputs for the emergency call button and yes / no buttons to allow a trapped passenger to answer text messages that are displayed on the screen
Note: The 7100 Machine Room Unit is required to complete the installation of this unit
Elevator Emergency Phones
In the event of an elevator emergency, it’s crucial to provide trapped passengers with a reliable, hands-free connection to emergency help. Our Elevator Emergency Phones are meticulously designed to ensure clear communication. With our versatile mounting options and power and connectivity flexibility, our code compliant solutions will ensure you adhere to the highest standards set by ASME, B44, and ADA.
Surface/Box Mount Elevator SmartPhones
Our External Powered Surface Mount Elevator SmartPhones are ideal for elevator retrofits or any application where you need a reliable “push to talk” elevator phone.
Flush Mount Elevator SmartPhones
Provide trapped passengers with an easy, hands-free connection to emergency help with our Flush Mount Elevator SmartPhones. Our External Powered are available in brushed or mirrored Stainless Steel or a Muntz finish to match any elevator interior.
OEM or Behind the Panel Mount Elevator Phones
Our External Powered OEM Mount Elevator SmartPhones replacement were designed for elevator manufacturers to replace existing phones.
Select several different mounting options or contact us for direct mount competitor replacement units
Telephone Line Powered Elevator Phones
Utilize our Telephone Line Powered Phones when you have a POTS, PBX, or central office phone line. Available in both Rath SmartPhones and Janus EMS options designed with a variety of finishes and mounting options to fit most applications.
Lobby and MachineRoom Communication Systems
Per ASME A17.1 2019/CSA B44-19 ‘Safety Code for Elevators and Escalators’, buildings where elevators travel is 60 feet or more, must install in building rescue coordination.
Positioned strategically in the building’s lobby or machine rooms, our Lobby and MachineRoom options serve as the first point of contact for elevator maintenance teams and first responders. This offers them a comprehensive overview of the situation within each elevator, providing rapid response times and informed decision-making.
EMS5 System Call Director for 1-8 Elevator Phones
The EMS5 system by Janus is designed to provide seamless two-way, person-to-person voice communication for elevators, accommodating up to 8 elevator phones on a stand-alone unit, or up to 24 on three daisy-chained units. Ideal for small to medium installations, this system offers flexible communication options. With add-on lobby or machine room master phones, the EMS5 ensures all rescue locations have voice pathways to get the passenger the assistance it needs.
Small, Compact Size: Compact but powerful footprint allows for an EMS5 to be installed to be installed on any wall, even if construction is completed, making it an effective solution for retrofit installations.
Stand-Alone Capability: The EMS5 provides person-to-person voice off-site communication capabilities utilizing only one dedicated phone line. For installations with 24-7 on-site monitoring, the EMS5 can also be set up as a stand-alone intercom system, the site to meet code without reoccurring costs in un-necessary phone lines.
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Small, Compact Size: Compact but powerful footprint allows for an EMS5 to be installed to be installed on any wall, even if construction is completed, making it an effective solution for retrofit installations.
Stand-Alone Capability: The EMS5 provides person-to-person voice off-site communication capabilities utilizing only one dedicated phone line. For installations with 24-7 on-site monitoring, the EMS5 can also be set up as a stand-alone intercom system, the site to meet code without reoccurring costs in un-necessary phone lines.
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
SmartRescue for 1-10 Elevator Phones
The SmartRescue System is designed to provide seamless two-way, person-to-person voice communication for elevators, accommodating up to 10 Rath 2100 Series elevator phones on one system, utilizing only one dedicated phone line.
Ideal for smaller installations, this system offers an affordable solution without compromising on quality or performance.
Includes a range of Base Stations both 5 & 10 Zone configurations
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Ideal for smaller installations, this system offers an affordable solution without compromising on quality or performance.
Includes a range of Base Stations both 5 & 10 Zone configurations
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Command Center for 1-116 Elevator Phones
The Command Center System is designed to provide efficient two-way, person-to-person voice communication for elevators, accommodating an impressive range of 1 to 116 elevator phones.
The system is compatible with most Rath and Janus Elevator phones, allowing the phone to be tailored to fit the specific needs of your elevator car
Utilizing just one pair of wires between each elevator phone & Distribution Module, the system ensures easy and cost-effective installation
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
The system is compatible with most Rath and Janus Elevator phones, allowing the phone to be tailored to fit the specific needs of your elevator car
Utilizing just one pair of wires between each elevator phone & Distribution Module, the system ensures easy and cost-effective installation
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Multi-Line Command Center for 1- 32 Lines
The Multi-Line Command Center System is designed to provide efficient two-way, person-to-person voice communication for installations requiring a phone per elevator or per bank of elevators. The system can accommodate an impressive range of 1 to 116 elevator phones and up to 32 dedicated phone lines. With the ability to have one dedicated phone line per elevator phone, the Multi-Line Command Center makes it easy to guarantee all elevators can get communication without interference.
The system is compatible with most Rath and Janus Elevator phones, allowing the phone to be tailored to fit the specific needs of your elevator car
The Distribution Module included as a part of the Multi-Line Command Center acts as a simple, centralized location for all of the system wiring
Utilizing just one pair of wires between each elevator phone & Distribution Module, the system ensures easy installation.
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
The system is compatible with most Rath and Janus Elevator phones, allowing the phone to be tailored to fit the specific needs of your elevator car
The Distribution Module included as a part of the Multi-Line Command Center acts as a simple, centralized location for all of the system wiring
Utilizing just one pair of wires between each elevator phone & Distribution Module, the system ensures easy installation.
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Elevator 2D & 3D Door Detection
Elevator doors are more than just a gateway to vertical transportation; they are a critical component in ensuring the safety of passengers. However, they also represent one of the most significant risk points within an elevator system. Elevator Light Curtains (Safety Edges) act as protective barriers across elevator doors using infrared sensors. When an obstruction, like a passenger or object, interrupts this barrier, the doors automatically reverse to prevent accidents.
There are two main types:
There are two main types:
- 2D Detection Systems: Positioned between the elevator doors, they ensure nothing gets trapped during closure
- 3D Door Detection Systems: Beyond monitoring between the doors, they also detect obstructions in the landing area, offering superior safety
E-Series 2D Safety Edge
The E-Series 2D are our most versatile and cost-effective solution, designed to provide reliable door protection without compromising on safety. With its adaptable design, the E-Series caters to diverse elevator requirements, ensuring passengers are safeguarded during their journey.
Pana40+ 2D Safety Edge
The Pana40+ stands as a cornerstone in our product lineup, recognized for its unparalleled quality and steadfast reliability. This safety edge ensures comprehensive protection through a dense curtain of 40 parallel infrared beams.
Panachrome+ 2D Safety Edge
The Panachrome+ is the world’s most complete elevator door detection system featuring dense infrared 234 beam safety edge. This premium safety edge has red and green indicators to highlight door movement and is also available with 3D detection, extending passenger protection into the landing zone.
Panachrome 3D Safety Edge
The Panachrome 3D takes elevator safety to the next level by combining the trusted reliability of infrared technology with the added dimension of 3D detection. This system not only ensures the safety of passengers entering and exiting the elevator but also enhances their experience with 154 intuitive beams with red and green indicators and an optional voice to indicate door opening and closing. This unique combined system is an effective solution for sites where passenger traffic is high or where additional safety measures are required.
Elevator Communications Failure
In the realm of elevator safety, continuous communication is paramount. Elevator emergencies can be distressing, and the last thing one would want is a non-functional communication line. Recognizing this, the ASME 17.1 code has set forth specific requirements to ensure that elevator phone lines are always monitored for activity and operational.
Phone Line Monitoring requirements include:
Phone Line Monitoring requirements include:
- End-to-End Monitoring
- Immediate Alerts
- Location Specific Alert
2100-ALARM After Market System
The 2100-ALARM provides a simple, fully functional solution to meet the 2010 and 2013 ASME codes. The code states that each elevator phone needs to check for an active phone line at least once in a 24 hour period.
The 2100-ALARM checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
A key switch is used to silence the audible alarm
If the phone line has not been re-established within a 24 hour period, the audible will resound
The 2100-ALARM checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
A key switch is used to silence the audible alarm
If the phone line has not been re-established within a 24 hour period, the audible will resound
OEM System – Alarm and Junction Board
The OEM System – Alarm and Junction Board provides a simple, fully functional solution to meet the 2010 and 2013 ASME codes. The code states that each elevator phone needs to check for an active phone line at least once in a 24 hour period.
The OEM System – Alarm and Junction Board checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
A key switch is used to silence the audible alarm
If the phone line has not been re-established within a 24 hour period, the audible will resound
The OEM System – Alarm and Junction Board checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
A key switch is used to silence the audible alarm
If the phone line has not been re-established within a 24 hour period, the audible will resound
LMA Line Monitoring Alert
Designed to work with our EMS phones. The Phone Line Monitoring Alert Panel meets the ASME / B44 2009 and 2010 code that requires audible and visual signal in the lobby in the event of phone line failure.
When used with our phones, that have the phone line monitoring option, the LMA unit completes the system.
The 2100-ALARM checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
Reset allows audible signal to be silenced with standard J200 key
Resets automatically when phone line is restored
The 2100-ALARM checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
Reset allows audible signal to be silenced with standard J200 key
Resets automatically when phone line is restored
LMA-NC Line Monitoring Alert No Cover
The Phone Line Monitoring Alert Kit meets the ASME / B44 2009 and 2010 code that requires audible and visual signal in the lobby in the event of phone line failure.
When used with our EMS phones, that have the phone line monitoring option, the LMA-NC unit completes the system.
The OEM system checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
Reset allows audible signal to be silenced with standard J200 key
Resets automatically when phone line is restored
The OEM system checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
Reset allows audible signal to be silenced with standard J200 key
Resets automatically when phone line is restored
