SmartView Controller 2100-SVCB
Rath Janus

SmartView Controller 2100-SVCB

Only available in
The 2100-SVCB SmartView Controller is the brains of the system that connects the software, display, buttons, and camera for a fully functional system. The board is mounted inside of a box that can be mounted to the elevator car.
SmartView Two-Way Elevator Visual Communication System

Dimensions: 7-1/4" H x 4-3/4" W x 1-7/8" D

Style: Stainless Steel Box

Installation Requirements:

  • Internet Connection:
    • Routed internet connection using DHCP, OR
    • Cellular modem with data (available from RATH)
    • Laptop with a network connection for testing

Part Numbers:

  • 2100-SVC: Press Yes or No Button
  • 2100-SVC-1: Press Door Open for Yes, Press Door Closed for No
  • 2100-SVCCE (for use with CE Elite Pi): Press Yes or No Button
  • 2100-SVCCE-1 (for use with CE Elite Pi): Press Door Open for Yes, Press Door Closed for No

Power Requirements:

  • 12v or 24v through 2100-SVE Extender
  • Requires power from the elevator or remotely in the machine or electrical room

Wiring Requirements: Requires CAT5 or better Ethernet connection or connection to a 2-wire extender

Programming Features: Board features a uniquely assigned ID address for easy software setup

Additional Features:

  • Compatible with the SmartView Software
  • Compatible with the SmartView Display
  • Connection for the SmartView Camera
  • Dry contacts for Yes/No inputs
  • Data Usage: 4.4 mb/minute in active state, 0 in idle state (pings every 24 hours)
  • Current Draw:
    • Active: 12v = 1A , 24v = 0.5A
    • Idle: 12v = 0.5A, 24v = 0.25A
  • Specifications:

  • Environmental: 32°F to 158°F (0° C to 70° C)
  • Mounting: Mounting Plate included
  • Warranty: 2 years

    York Racecourse modernises its lifts for improved experience
    Unitas, Stoke City Council wins with full lift safety package
    Oldest Inn in Germany Installs Latest Lift Safety Technology
    Digital Switch in Spain: digitalising emergency lift phones