The EMS5 system by Janus is designed to provide seamless two-way, person-to-person voice communication for elevators, accommodating up to 8 elevator phones on a stand-alone unit, or up to 24 on three daisy-chained units. Ideal for small to medium installations, this system offers flexible communication options. With add-on lobby or machine room master phones, the EMS5 ensures all rescue locations have voice pathways to get the passenger the assistance it needs.
Small, Compact Size: Compact but powerful footprint allows for an EMS5 to be installed to be installed on any wall, even if construction is completed, making it an effective solution for retrofit installations.
Stand-Alone Capability: The EMS5 provides person-to-person voice off-site communication capabilities utilizing only one dedicated phone line. For installations with 24-7 on-site monitoring, the EMS5 can also be set up as a stand-alone intercom system, the site to meet code without reoccurring costs in un-necessary phone lines.
All components are engineered to meet current industry codes, ensuring reliability and peace of mind

The SmartRescue System is designed to provide seamless two-way, person-to-person voice communication for elevators, accommodating up to 10 Rath 2100 Series elevator phones on one system, utilizing only one dedicated phone line.
Ideal for smaller installations, this system offers an affordable solution without compromising on quality or performance.
Includes a range of Base Stations both 5 & 10 Zone configurations
All components are engineered to meet current industry codes, ensuring reliability and peace of mind

The Command Center System is designed to provide efficient two-way, person-to-person voice communication for elevators, accommodating an impressive range of 1 to 116 elevator phones.
The system is compatible with most Rath and Janus Elevator phones, allowing the phone to be tailored to fit the specific needs of your elevator car
Utilizing just one pair of wires between each elevator phone & Distribution Module, the system ensures easy and cost-effective installation
All components are engineered to meet current industry codes, ensuring reliability and peace of mind

The Multi-Line Command Center System is designed to provide efficient two-way, person-to-person voice communication for installations requiring a phone per elevator or per bank of elevators. The system can accommodate an impressive range of 1 to 116 elevator phones and up to 32 dedicated phone lines. With the ability to have one dedicated phone line per elevator phone, the Multi-Line Command Center makes it easy to guarantee all elevators can get communication without interference.
The system is compatible with most Rath and Janus Elevator phones, allowing the phone to be tailored to fit the specific needs of your elevator car
The Distribution Module included as a part of the Multi-Line Command Center acts as a simple, centralized location for all of the system wiring
Utilizing just one pair of wires between each elevator phone & Distribution Module, the system ensures easy installation.
All components are engineered to meet current industry codes, ensuring reliability and peace of mind

In the modern era of connectivity, the IP Command Center system stands as a testament to innovation and efficiency in elevator communication. Designed to handle between 1 and 128 elevator phones, this system leverages Voice Over Internet Protocol (VOIP) to provide seamless two-way, person-to-person communication for elevators. This system is ideal for large installations unable to run the wire required for the elevator phones back to one centralized location. The IP Command Center system is more than just a communication tool; it’s a comprehensive solution that integrates with your existing network infrastructure, offering:
Integration: Ideal for new construction, retrofit projects, or upgraded phone systems, the IP Command Center system can be seamlessly integrated into your existing network.
Remote Management: Utilizing VOIP, the system enables voice communication over a network or internet connection, allowing for remote system monitoring and control.
Cost-Effectiveness: By leveraging your existing network infrastructure, the IP Command Center system offers a cost-effective solution without compromising on quality or compliance.

Designed to work with all Rath Command Center, Multi-Line and IP Command Center Systems
These power supplies ensure that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
Following this period, they retain the capability to activate all alarm notification appliances used for evacuation, functioning for 60 minutes in total darkness
Tailored to support the Command Center’s Analog or IP configurations, these power supplies provide a robust and reliable solution, enhancing the safety and efficiency of your elevators and buildings

The SHW-MRI system by Janus is designed to provide efficient communication between a single or two-car elevator group and the machine room. Designed to work with all Rath and Janus phones, industry leaders in elevator emergency communication.
Efficient Installation: SHW-MRI does not require any modification to be done in the elevator car or any additional phone lines allowing installation to be completed in an average of 20 minutes
Small, Compact Size: Compact but powerful footprint allows for an SHW-MRI to be installed to be installed on any wall, even if construction is completed, making it an effective solution for small retrofit installations
All components are engineered to meet current industry codes, ensuring reliability and peace of mind

Innovative technology enables the Machine Room Intercom to work with any type of ADA compliant elevator phone, allowing a low cost, easy to install retrofit solution. Just plug in the included touch tone phone (HDSTL) to the provided jack, press the button and call the elevator phone.