USA
Command Center for 1-116 Elevator Phones
Only available in
COMPLIANT WITH
Overview
The Command Center System is designed to provide efficient two-way, person-to-person voice communication for elevators, accommodating an impressive range of 1 to 116 elevator phones.
- The system is compatible with most Rath and Janus Elevator phones, allowing the phone to be tailored to fit the specific needs of your elevator car
- Utilizing just one pair of wires between each elevator phone & Distribution Module, the system ensures easy and cost-effective installation
- All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Power Requirements:
- Command Center and Sub-Master Stations are powered from the Distribution Module
Wiring Requirements:
- Command Center and Sub-Master to Distribution Module requires a single pair
- Machine Room Phone (2300-630RC) requires a single pair
- SmartPhones to Distribution Module requires a single pair
Phone Capabilities:
- Calls wait in queue until previous call is disconnected and receive a message stating that an emergency call is in progress. When the prior call clears, the next phone in queue is connected
- Includes handset and speaker phone for communication to phones
- Works with both Rath 2100 SmartPhones or Janus EMS phones
- LEDs indicate which phones have initiated a call
- Rescue personnel can communicate with individual phones and outside party
Distribution Module Features:
- Included with Command Center
- Install on a wall or table top
- Requires 120vac power with battery backup or Rath Power Supply with battery backup
- Single dedicated phone line or as an Intercom System
Additional Features:
- Standard system allows for a Command Center and a single Sub-Master Station (contact Rath for additional Sub-Masters)
- Audible alert sounds when phones place a call until Command Center or Sub-Master Station joins conversation
- Can be configured with the main Command Center and multiple Sub-Master Stations (available in desk, surface, or flush mount) and Command Center MachineRoom Phone 2300-630RC (which allows for additional onsite communication with all devices connected to the system)
Warranty: 2 years
Choose from Surface, Flush or Desk Mount
Available in 12, 16, 28, 36, 56, 76, 96, or 116 Zone
 2500-__RC Series Surface Mount 2500-__RCF Flush Mount Surface Mount Zone: 12 (2500-12RC) 16 (-16RC) 28 (-28RC) 36 (-36RC) 56 (-56XRC) 76 (-76XRC) 96 (-96XRC) 116 (-116XRC) 2500-12RC, 16RC = 15.14″ H x 12″ W x 6.19″ D 2500-28RC, 36RC, 56XRC, 76XRC, 96XRC, 116XRC = 21.03″ H x 20.3″ W x 5.19″ D Flush Mount Zone: 12 (2500-12RCF) 16 (-16RCF) 28 (-28RCF) 36 (-36RCF) 56 (-56XRCF) 76 (-76XRCF) 96 (-96XRCF) 116 (-116XRCF) 2500-12RCF, 16RCF Front Frame: 16.06″ H x 14″ W x 3.07″ D Back Box: 15.64″ H x 12″ W x 3″ D 2500-28RCF, 36RCF, 56XRCF, 76XRCF, 96XRCF, 116XRCF Front Frame: 21.13″ H x 25″ W x 3.06″ D Back Box: 20.66″ H x 23″ W x 3″ D |  2500-__NC Series Desk Mount See data sheet for dimensions Zone: 12 (2500-12NC) 16 (-16NC) 28 (-28NC) 36 (-36NC) 56 (-56XNC) 76 (-76XNC) 96 (-96XNC) 116 (-116XNC) |  Distribution Modules 12-36 Zone System = 2.04″ H x 17.28″ W x 11.8″ D 56-116 Zone System = 6.83″ H x 17.18″ W x 8.9″ D |
You might also be interested in
UPS Power Supplies for Command Centers
Designed to work with all Rath Command Center, Multi-Line and IP Command Center Systems
These power supplies ensure that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
Following this period, they retain the capability to activate all alarm notification appliances used for evacuation, functioning for 60 minutes in total darkness
Tailored to support the Command Center’s Analog or IP configurations, these power supplies provide a robust and reliable solution, enhancing the safety and efficiency of your elevators and buildings
These power supplies ensure that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
Following this period, they retain the capability to activate all alarm notification appliances used for evacuation, functioning for 60 minutes in total darkness
Tailored to support the Command Center’s Analog or IP configurations, these power supplies provide a robust and reliable solution, enhancing the safety and efficiency of your elevators and buildings
Machine Room Intercoms SHW-MRI
The SHW-MRI system by Janus is designed to provide efficient communication between a single or two-car elevator group and the machine room. Designed to work with all Rath and Janus phones, industry leaders in elevator emergency communication.
Efficient Installation: SHW-MRI does not require any modification to be done in the elevator car or any additional phone lines allowing installation to be completed in an average of 20 minutes
Small, Compact Size: Compact but powerful footprint allows for an SHW-MRI to be installed to be installed on any wall, even if construction is completed, making it an effective solution for small retrofit installations
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Efficient Installation: SHW-MRI does not require any modification to be done in the elevator car or any additional phone lines allowing installation to be completed in an average of 20 minutes
Small, Compact Size: Compact but powerful footprint allows for an SHW-MRI to be installed to be installed on any wall, even if construction is completed, making it an effective solution for small retrofit installations
All components are engineered to meet current industry codes, ensuring reliability and peace of mind
Machine Room Intercom with Handset MRI-HDSTL
Innovative technology enables the Machine Room Intercom to work with any type of ADA compliant elevator phone, allowing a low cost, easy to install retrofit solution.
Just plug in the included touch tone phone (HDSTL) to the provided jack, press the button and call the elevator phone.
