OEM System – Alarm and Junction Board

Only available in
The OEM System – Alarm and Junction Board provides a simple, fully functional solution to meet the 2010 and 2013 ASME codes. The code states that each elevator phone needs to check for an active phone line at least once in a 24 hour period.
  • The OEM System – Alarm and Junction Board checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
  • If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
  • A key switch is used to silence the audible alarm
  • If the phone line has not been re-established within a 24 hour period, the audible will resound
Communications Failure Annuciator

Alarm Board: 2" H x 2.7" W x 0.48" D

Junction Board: 1.3" H x 2.25" W x 0.44" D

Power Requirements: 24vdc required

Additional Features: OEM boards for mounting behind the panel include: LED (requires momentary key switch)

Warranty: 2 years

York Racecourse modernises its lifts for improved experience
Unitas, Stoke City Council wins with full lift safety package
Oldest Inn in Germany Installs Latest Lift Safety Technology
Digital Switch in Spain: digitalising emergency lift phones