USA
2500 Series Command Center and Distribution Modules
Only available in
COMPLIANT WITH
Overview
A code-compliant Area of Refuge System requires a central control point to manage emergency assistance calls from Call Boxes.
- The Command Center base stations, designed to handle up to 116 Call Boxes, provide a seamless means of communication between stranded individuals, rescue personnel, and offsite parties
- Utilizing an analog home run configuration with a single pair of wires for each Call Box, the system ensures an efficient and cost-effective installation process
- The system includes Base Stations and Distribution Modules, Power Supply with battery backup sold separately
Power Requirements:
- Command Center and Sub-Master Stations are powered from the Distribution Module
- Command Center and Sub-Master to Distribution Module requires a single pair
Wiring Requirements:
- Command Center and Sub-Master to Distribution Module requires a single pair
- SmartPhones to Distribution Module requires a single pair
Phone Capabilities:
- Calls wait in queue until previous call is disconnected and receive a message stating that an emergency call is in progress. When the prior call clears, the next phone in queue is connected
- Includes handset and speaker phone for communication to Call Boxes
- Works with either our 2100 or 2400 series models with a single pair back to the Distribution Module. The 2400 Series is powered from the Distribution Module and the 2100 Series is powered from 2500-PWR24U
- LEDs indicate which Call Boxes have initiated a call
- Rescue personnel can communicate with individual Call Boxes and outside party
Distribution Module Features:
- Included with Command Center
- Install on a wall or table top
- Requires 120vac power with battery backup or RATH Power Supply with battery backup
- Single dedicated phone line or as an Intercom System
Additional Features:
- Standard system allows for a Command Center and a single Sub-Master Station (contact RATH® for additional Sub-Masters)
- Audible alert sounds when phones place a call until Command Center or Sub-Master Station joins conversation
- Can be configured with the main Command Center and multiple Sub-Master Stations (available in desk, surface, or flush mount)
Warranty: 2 years
Choose from Surface, Flush or Desk Mount
Available in 12, 16, 28, 36, 56, 76, 96, or 116 Zone
 2500-__RC Series Surface Mount 2500-__RCF Flush Mount Surface Mount Zone: 12 (2500-12RC) 16 (-16RC) 28 (-28RC) 36 (-36RC) 56 (-56XRC) 76 (-76XRC) 96 (-96XRC) 116 (-116XRC) 2500-12RC, 16RC = 15.14″ H x 12″ W x 6.19″ D 2500-28RC, 36RC, 56XRC, 76XRC, 96XRC, 116XRC = 21.03″ H x 20.3″ W x 5.19″ D Flush Mount Zone: 12 (2500-12RCF) 16 (-16RCF) 28 (-28RCF) 36 (-36RCF) 56 (-56XRCF) 76 (-76XRCF) 96 (-96XRCF) 116 (-116XRCF) 2500-12RCF, 16RCF Front Frame: 16.06″ H x 14″ W x 3.07″ D Back Box: 15.64″ H x 12″ W x 3″ D 2500-28RCF, 36RCF, 56XRCF, 76XRCF, 96XRCF, 116XRCF Front Frame: 21.13″ H x 25″ W x 3.06″ D Back Box: 20.66″ H x 23″ W x 3″ D |  2500-__NC Series Desk Mount See data sheet for dimensions Zone: 12 (2500-12NC) 16 (-16NC) 28 (-28NC) 36 (-36NC) 56 (-56XNC) 76 (-76XNC) 96 (-96XNC) 116 (-116XNC) |  Distribution Modules 12-36 Zone System = 2.04″ H x 17.28″ W x 11.8″ D 56-116 Zone System = 6.83″ H x 17.18″ W x 8.9″ D |
You might also be interested in
Command Center 360° Supervision
NFPA 72 2016 360° Supervision requirements state that pathways between the remote call stations and the master control station shall be monitored for integrity.
To meet these requirements:
Each 2400 Series Call Box, Command Center, and outside phone line connect directly into the RATH Supervisor Board (2500__-SPRVSR). The 2500-__SPRVSR has a Communications Failure relay output that can be connected to an addressable fire alarm module or fire control panel
If power supervision is needed, an additional purchase of the UPS Monitor (2500-UPSMONITOR), which includes a Power Failure relay output, is required.
Each 2400 Series Call Box, Command Center, and outside phone line connect directly into the RATH Supervisor Board (2500__-SPRVSR). The 2500-__SPRVSR has a Communications Failure relay output that can be connected to an addressable fire alarm module or fire control panel
If power supervision is needed, an additional purchase of the UPS Monitor (2500-UPSMONITOR), which includes a Power Failure relay output, is required.
Command Center Power Supplies
Our range of power supplies for the Command Center system is designed to meet backup requirements as dictated by NFPA 72.
These power supplies ensure that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
Following this period, they retain the capability to activate all alarm notification appliances used for evacuation or directing aid to the area of refuge, functioning for 60 minutes in total darkness
Tailored to support the Command Center’s analog configuration for up to 116 Call Boxes, these power supplies provide a robust and reliable solution, enhancing the safety and efficiency of your Area of Refuge system
These power supplies ensure that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
Following this period, they retain the capability to activate all alarm notification appliances used for evacuation or directing aid to the area of refuge, functioning for 60 minutes in total darkness
Tailored to support the Command Center’s analog configuration for up to 116 Call Boxes, these power supplies provide a robust and reliable solution, enhancing the safety and efficiency of your Area of Refuge system
2400 Series Command Center Call Boxes
Each Area of Refuge requires hands-free, two-way emergency communication devices (Call Boxes) on each floor above and below the main exit floor.
The Command Center Call Boxes, designed for large-scale installations of up to 116 Call Boxes, provide a reliable means for distressed individuals to communicate with rescue personnel during an emergency
Utilizing a single pair of wires for each Call Box, the system ensures an efficient and cost-effective installation process
The Command Center Call Boxes offer a scalable and robust solution without compromising on quality or compliance, ensuring top-tier reliability and adherence to industry standards
The Command Center Call Boxes, designed for large-scale installations of up to 116 Call Boxes, provide a reliable means for distressed individuals to communicate with rescue personnel during an emergency
Utilizing a single pair of wires for each Call Box, the system ensures an efficient and cost-effective installation process
The Command Center Call Boxes offer a scalable and robust solution without compromising on quality or compliance, ensuring top-tier reliability and adherence to industry standards
