USA
2100 Series SmartRescue Call Boxes
Only available in
COMPLIANT WITH
Overview
Each Area of Refuge requires hands-free, two-way emergency communication devices (Call Boxes) on each floor above and below the main exit floor.
- The SmartRescue Call Boxes, utilizing an analog home run configuration, offer an efficient means for distressed individuals to communicate with rescue personnel during an emergency
- Equipped with built-in battery backup, these Call Boxes ensure uninterrupted communication even during power failures
AVIRE App (EN)
Additional Compliance:
- Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
- Complies with Section 6.4 of UL 60950-1
Power Requirements: 24vdc from part # 2500-PWR24U
Programming Features:
- Programmable with up to 5 emergency numbers
- Recordable location message (18 seconds)
- On-site keypad programming or remote programming
Phone Capabilities:
- Requires analog telephone line (POTS, PBX, or central office line)
- Phone checks every 24 hours for an active phone line, if one is not detected, phone will provide a relay trip
- Automatic answer feature with audible ring
- Touch Tone operation only (Touch Tone is an AT&T registered trademark)
Supervision: Includes built-in communication verification software and a failure relay output which can be connected to an addressable fire alarm module or the fire control panel
Additional Features:
- Built-in 10 phone consolidator feature allows you to install 10 Call Boxes and 1 Base Station on a single telephone line
- Remote or on-site diagnostic test
- Automatic dialer (31 digit programmable memory)
- Built-in battery backup recharges from 24vdc power (allows for a minimum of 4 hours of talk time upon power loss)
- 7.2V 300mAH battery (part # RP7300110)
- Optional Strobe interface and relay
Warranty: 2 years
SmartRescue Call Boxes available in 3 mounting options:
Flush Mount
2100-958NSR Flush Mount Face Plate: 9-1/2″ H x 7-1/2″ W Back Box: 8″ H x 6″ W x 3″ D Style: Brushed Stainless Steel |  2100-958NMBR Flush Mount Face Plate: 9-1/2″ H x 7-1/2″ W Back Box: 8″ H x 6″ W x 3″ D Style: Antique Bronze |  2100-958SSRC2 Flush Mount with Cover Face Plate: 11-3/8″ H x 8″ W Back Box: 9-7/8″ H x 6-1/2″ W x 3″ D Cover: 9-3/4″ H x 6-1/2″ W x 1-1/4″” D Style: Brushed Stainless Steel |
Surface Mount
 2100-956SR Surface Mount 7-1/4″ H x 4-3/4″ W x 1-7/8″ D Style: Stainless Steel Box |  2100-956SRM Surface Mount 7-1/4″ H x 4-3/4″ W x 1-7/8″ D Style: Stainless Steel Box |  2100-956SSRC2 Surface Mount with Cover Face Plate: 10″ H x 6-17/25″ W Back Box: 9-7/8″ H x 6-1/2″ W x 3″ D Cover: 9-3/4” H x 6-1/2” W x 1-1/4” D Style: Stainless Steel Box |  2100-956RR Surface Mount 7-1/4″ H x 4-3/4″ W x 1-7/8″ D Style: Red Powder Coated |
Exterior Rated
 2100-984LR Surface Mount 9-7/8″ H x 6-5/8″ W x 3-1/4″ D Style: Red Fiberglass, NEMA, Exterior Rated |  2100-984LRC1 Surface Mount with Cover Call Box Size: 9-7/8″ H x 6-5/8″ W x 3-1/4″ D Cover Size: 6-2/5″ H x 3-3/4″ W x 2-1/4″ D Style: Red Fiberglass, NEMA, Exterior Rated |
You might also be interested in
2500-PWR24U Power Supply
The 2500-PWR24AL provides 24vdc power to the RATH Area of Refuge call boxes while meeting backup requirements as dictated by NFPA 72.
The power supply ensures that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
The power supply ensures that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition)
SmartRescue 360° Supervision
NFPA 72 2016 Supervision requirements state that pathways between the remote call stations and the master control station shall be monitored for integrity.
To meet these requirements:
Each 2100 Series Call Box comes with built-in communication verification software and a failure relay output which can be connected to an addressable fire alarm module or the fire control panel
Power Supervision requires an additional purchase of the 2500-PWR24U power supply
Each 2100 Series Call Box comes with built-in communication verification software and a failure relay output which can be connected to an addressable fire alarm module or the fire control panel
Power Supervision requires an additional purchase of the 2500-PWR24U power supply
2500 Series SmartRescue Base Stations
A code-compliant Area of Refuge System requires a central control point to manage emergency assistance calls from Call Boxes.
The SmartRescue Base Stations, utilizing an analog home run configuration, provide a seamless means of communication between stranded individuals, rescue personnel, and offsite parties
Equipped with built-in battery backup, these base stations ensure uninterrupted communication even during power failures
Designed for smaller installations of up to 10 Call Boxes, the SmartRescue Base Stations provide an affordable yet robust solution without compromising on quality or compliance
The SmartRescue Base Stations, utilizing an analog home run configuration, provide a seamless means of communication between stranded individuals, rescue personnel, and offsite parties
Equipped with built-in battery backup, these base stations ensure uninterrupted communication even during power failures
Designed for smaller installations of up to 10 Call Boxes, the SmartRescue Base Stations provide an affordable yet robust solution without compromising on quality or compliance
