DCP Accessories Universal Power Supply
COMPLIANT WITH
Overview
The MEMCO Universal Power Supply is mounted in the motor room and provides both 12VDC power and battery backup to support an extended CAN Bus system for the Digital Communications Platform.
Mains input (85-230VAC 50/60 Hz) Constant 12VDC 1A Two LEDs to indicate power status
- Provides a regulated 24V DC power supply
- Isolates light curtains from lift control circuitry and power systems
- Potential free relay output
- Robust housing
- 3 products witin the range
- 280 000
- 281 000
- 283 000
- Detector wiring instructions on the inside of lid for all 280 series PSUs
- Product Code 280 000 / 281 000 / 283 000
- Input voltage 115-240V AC / 24V DC nominal. An input range of 15V – 36V DC / 24V DC nominal. An input range of 18V – 30V DC 24V AC (max) is acceptable
- Output voltage 12VDC nominal
- Output current 120mA max (for use with MEMCO safety edges only)
- Compatibility Safety Edges Elite Model, E, X and K Series
- Compatibility Safety Edges logic Outputs
- PNP Normally Closed
- PNP Normally Open
- NPN Normally Closed
- NPN Normally Open
- Trigger Logic Settings Two logic output switches (SW2 and SW3 to be set for detector configuration)
- Relay output Single pole change-over with hard silver contacts. Maximum switching current 5 amps at 240V AC
- Housing High impact strength plastic box. 130mm x 100mm x 45mm
- Connections Screw terminal blocks
- Audible Tone Fitted with a beeper and beeper on/off switch
- Operating temperature range -10 to +60oC to EN 60068-2-14:2009
- Storage temperature range -25 to +60oC to EN 60068-2-1:2007 and EN 60068-2-2:2007
- Operating humidity range +55oC @ 93%RH and +25oC @ 95%RH to EN 60068-2-30:2005
- 280 000: Power Supply Unit , 115/240V AC Mains input
- 281 000: Power Supply Unit , 15/36V DC
Files and Resources
PSU 280 Series Datasheet (English)
Datasheets
PSU 1500 Datasheet (English)
Datasheets
Universal Power Supply Installation Guide (Multilanguage)
Install Guides
You might also be interested in
New
4G VoLTE DCP 2.0 Lift Digital Communication Platform
Ensure passenger safety and compliance with AVIRE’s advanced 4G Digital Communication Platform (DCP) 2.0. Designed to meet the latest EN-81-28 standards, this innovative solution secures reliable, real-time lift emergency communication while adapting to the evolving needs of modern buildings and infrastructure changes. Whether you’re upgrading from 2G or seeking a dependable 4G VoLTE connection, the 4G DCP 2.0 is the smart choice to future-proof your elevator emergency systems.
Memcom+ Lift Emergency Phone
The Memcom+ lift emergency phone is a high-quality, and reliable autodialler that provides trapped passengers quick and easy access to emergency assistance. The unit has a speaker, microphone, and backlit LCD for programming and status updates.
New
DCP EVO Lift Digital Communication Platform
All-in-One Emergency Communication Hub
The DCP Evo combines a GSM gateway, lift emergency phone, and M2M gateway, delivering everything you need in one device. It’s the control centre of your modern lift emergency communication system. For installations that need an extra serial port, we also offer the DCP Evo X – same functionality, one added RS232/RS422/485 port.
Built on a legacy of trusted AVIRE gateways and emergency lift phones, the DCP Evo now supports VoIP and VoLTE and includes new features that make it easier to maximise your lift monitoring setup.
Case studies
Related Articles
AVIRE at LIFTEX 2025: Connecting with the Industry and Solving Real Challenges
Why TLS Security Matters in Lift Communication
Why Managed Lift Emergency Communication Services Are Critical for the Education Sector
Enhancing Lift Worker Safety with Four-Way Emergency Communication
