Pit Phone Digital Audio Unit
COMPLIANT WITH
Overview
The MEMCO PIT Digital Audio Unit is a pit phone unit that is mounted in the pit of a lift shaft, to provide an emergency communication point when connected to the DCP. It has an emergency battery backup and a yellow casing for visibility.
- 50High digital audio quality
- Integrated battery back-up
- Compact mechanical footprint
- Easily install to Digital Communications Platform with 4-wire connection
- CAN or serial connections
- Yellow casing for visibility
- EN81-28 and EN81-70 compliant
Part number: AC-DAP18-100-F-00-000
Mounting location: PIT
Colour casing: Yellow
Alarm button: Yes
Maintenance button: Yes
External pictograms: No
Siren support: No
External microphone & speaker: No
Internal microphone & speaker:Yes
Battery: Integrated
Battery & phone fault indicator: No
Power supply: 8-28 VDC
Consumption: 43mA – 190mA
Connections: CAN
Operating temperature: -10 to +65°C
Dimensions: 28 x 94.65 x 23mm
Induction Loop (IL): –
AC-DAP18-100-F-00-000: CAN PIT Digital Audio Unit with integrated battery
Files and Resources
Emergency Communication System LPBus Datasheet (English)
Datasheets
Pit Phone Installation Guide (Multilanguage)
Install Guides
You might also be interested in
Navigation Box
A smart sensor that provides insights into lift journeys. The lift Navigation Box helps building owners and maintenance providers make informed, data-driven decisions on the timing of essential maintenance to reduce malfunction and downtime.
Lift HAWK
Remote lift monitoring reduces false and costly engineer callouts. The compact lift sensor monitors lift movements. To identify possible issues, the self-learning system identifies low-activity periods to autonomously perform tests.
CAN Bus Splitter
The CAN Bus is the ‘nervous system’ of the lift network, acting as an intermediate between one Digital Communication Platform (DCP) and multiple Digital Audio Units. Connect up to four CAN Bus lines with the MEMCO CAN Bus splitter, to simplify multiple-shaft or single-shaft installation wiring. The CAN Bus Splitter contains five CAN terminating resistors and does not require a power supply.
