New
DCP EVO Lift Digital Communication Platform
COMPLIANT WITH
Overview
All-in-One Emergency Communication Hub
The DCP Evo combines a GSM gateway, lift emergency phone, and M2M gateway, delivering everything you need in one device. It’s the control centre of your modern lift emergency communication system. For installations that need an extra serial port, we also offer the DCP Evo X – same functionality, one added RS232/RS422/485 port.
Built on a legacy of trusted AVIRE gateways and emergency lift phones, the DCP Evo now supports VoIP and VoLTE and includes new features that make it easier to maximise your lift monitoring setup.
Full-Time Connection to the AVIRE Hub: Ensure continuous connectivity and accessibility. Real-time data available when connected to the Lift Controller or other AVIRE MEMCO products.
Additional Interfaces for Versatile Installations: RJ-11, CAN Bus, Serial (RS232 or RS422/485), USB, General Purpose I/O. Tailored support for diverse lift installation scenarios.
Data Encryption for Enhanced Security: Transport Layer Security (TLS) ensures the encryption of all data traffic. Safeguarding the device and your crucial data.
VoIP powered by NEXiiO: Future-proof your system from the PSTN switch off and the 2G/3G sunset with VoIP (voice over internet protocol) connectivity.
Need more serial connectivity? The DCP Evo X offers the same functionality as the DCP Evo, with an extra RS232/RS422/485 serial port, which is ideal for sites where a second serial connection to the lift controller or another device is required.
Need a second serial port?
The DCP Evo is also available in an X variant, which includes one additional RS232/RS422/485 port. It’s the same trusted DCP Evo, just with an extra connection when your site needs it.
Why Choose DCP Evo?
Network Future-Proofing: Stay ahead of the curve with the DCP Evo with a solution which is capable of utilising 4G VoLTE & VoIP connectivity. Prepare for imminent network changes, including the Digital swich over from analogue to digital coming soon, the phasing out of 3G, and the 2G sunset. VoIP – powered by NEXiiO
Monitoring flexibility: DCP Evo has connectivity options for many third party devices, increasing flexibility in receiving and sending data for remote monitoring on the elevator.
Mobile Network Flexibility and Reliability: Works over VoIP, VoLTE, and 4G data, with automatic fallback to 2G. Optimised for AVIRE M2M SIM cards to ensure strong, stable connectivity.
Ease of Installation: Remote configuration via the AVIRE Hub, mobile app, or SMS, no need to be onsite. Integrated signal tester helps engineers quickly find the best spot in the lift shaft.
Cost-Effective Solutions: Multiple remote configuration options reduce on-site engineer time. Technical and configuration calls via the data network minimize voice call costs.
Battery Back-Up: Built-in battery support for up to 3 hours during power outages (may vary based on usage).
Backward Compatibility: Compatible with any brand of analogue phone using the P100 protocol.
DCP Evo
AC-ECM10-610-F-20-000: DCP Evolution with RS232 Serial Port
DCP Evo X
AC-ECM10-611-F-40-000: DCP Evo X (RS232 and RS485)
Accessories
AC-ATM00-050-0-00-000: Extension antenna (5m)
AC-ATM00-150-0-00-000: Extension antenna (15m)
MC-PNM00-100-A-00-000: Machine Room Handset
Files and Resources
4G DCP Evo Install Guide
Install Guides
DCP EVO X Install Guide
Install Guides
DCP Evo Datasheet
Datasheets
DCP Evo X Datasheet
Datasheets
Accessories
Triphony Unit
The Triphony Unit is a digital audio module, powered via digital audio units (DAU), that can be used with the Digital Communications Platform (DCP) for internal or external emergency lift communication. It can be installed on the top or bottom of the lift car.
CAN Bus Splitter
The CAN Bus is the ‘nervous system’ of the lift network, acting as an intermediate between one Digital Communication Platform (DCP) and multiple Digital Audio Units. Connect up to four CAN Bus lines with the MEMCO CAN Bus splitter, to simplify multiple-shaft or single-shaft installation wiring. The CAN Bus Splitter contains five CAN terminating resistors and does not require a power supply.
Wiring Looms
Part of the MEMCO Emergency Communication System. Loom wire for the Car Operating Panel Digital Audio Unit (COP DAU) as well as the Top of Car Digital Audio Unit (TOC DAU). Compatible with OEM.
You might also be interested in
New
4G VoLTE DCP 2.0 Lift Digital Communication Platform
Ensure passenger safety and compliance with AVIRE’s advanced 4G Digital Communication Platform (DCP) 2.0. Designed to meet the latest EN-81-28 standards, this innovative solution secures reliable, real-time lift emergency communication while adapting to the evolving needs of modern buildings and infrastructure changes. Whether you’re upgrading from 2G or seeking a dependable 4G VoLTE connection, the 4G DCP 2.0 is the smart choice to future-proof your elevator emergency systems.
Legacy
4G Universal Gateway MK930
Welcome to the forefront of emergency communication technology with the 4G MK-930. Designed as a Universal Gateway, this device seamlessly integrates with various emergency telephone systems, ensuring compatibility across different brands and models of telephone systems.
The 4G MK-930 represents the latest innovation in Universal Gateways, offering both 2G and 4G VoLTE calling capabilities. Its features enhance connectivity, ensure regulatory compliance, and facilitate precise transmission of critical data.
Legacy
DCP Accessories Connex-02
The Connex-02 is a remote lift control module that, with the DCP, provides lift monitoring via the AVIRE HUB. User-defined inputs and outputs enable monitoring of service or maintenance status, engineer on-site duration, door cycles, and more.
