IP Command Center System for 1-128 Call Boxes

The IP Command Center System, designed to handle between 1-128 Call Boxes, leverages Voice Over Internet Protocol (VOIP) to provide seamless two-way communication between each required location and the fire command center or an approved central control point.

Scalability: Whether it’s a single phone installation or multiple ones supporting up to 128 Call Boxes. Ideal for large installations such as university campuses, stadiums, hospitals, offices and large horizontal building layouts
Integration: Ideal for new construction, retrofit projects, or upgraded phone systems, the IP Command Center system can be seamlessly integrated into your existing network
Remote Management: Utilizing VOIP, the system enables voice communication over a network or internet connection, allowing for remote monitoring and control
Cost-Effectiveness: The IP System is more than just a communication tool; by leveraging your existing network infrastructure, the IP Command Center system offers a cost-effective solution without compromising on quality or compliance

Two-Way System Requirements

Systems shall provide communication in each required location with hands-free communication devices (2100 Series IP Call Boxes) and central control point or fire command center (IP Command Center Base Stations)

Emergency communication systems require 24/7 monitoring. If the central control point (IP Command Center Base Stations) is not a constantly attended location, the system shall have a timed automatic dial-out capability to an off-site monitoring or 911

All pathways between the remote call stations and the master control station shall be monitored for integrity. (360° Supervision)
Pathway survivability requirements state all circuits remain survivable (2 Hour Fire-Rated Cable) for at least the same time as the fire rating of the building

Primary/Secondary (IP Power Supply) must be monitored for the presence of voltage. Battery back-up power must be capable of operating on stand-by for 24 hours and subsequently for a period of 4 hours of system activation

Systems shall also include both audible and visible signals (Signage)

IP Command Center Call Boxes

Each Area of Refuge requires hands-free, two-way emergency communication devices (Call Boxes) on each floor above/below the main exit floor.
The IP Command Center Call Boxes, designed to handle up to 128 Call Boxes, provide a seamless means of communication between stranded individuals, rescue personnel, and offsite parties
Utilizing Voice Over Internet Protocol (VOIP), these Call Boxes offer a clear connection over a network or internet, ensuring efficient communication

See product

2500 Series IP Command Center and Distribution Modules

A code-compliant Area of Refuge System requires a central control point to manage emergency assistance calls from Call Boxes.
The IP Command Center base stations, designed to handle up to 128 Call Boxes, provide a seamless means of communication between stranded individuals, rescue personnel, and offsite parties
Utilizing Voice Over Internet Protocol (VOIP), this system offers clear and efficient communication over a network or internet connection
Versatile solution that can be installed in new construction, retrofit projects, or when the building owner has upgraded their phone system to IP
The system includes Base Stations & Distribution Modules, with Power Supply and battery backup sold separately, providing a complete and robust solution for your Area of Refuge needs
This IP solution is ideal for single or multiple phone installations requiring internal communication with the Area of Refuge Call Boxes, ensuring safety and compliance without compromise

See product

RP7700104 UPS Power Supply

Designed to meet essential backup requirements (dictated by NFPA 72), ensuring that your system remains operational for a minimum of 24 hours under quiescent load (when the system is in a non-alarm condition).
Following this period, it retains the capability to activate all alarm notification appliances used for evacuation or directing aid to the area of refuge, functioning for 60 minutes in total darkness

See product

IP Command Center 360° Supervision

NFPA 72 2016 Supervision requirements state that pathways between the remote call stations and the master control station shall be monitored for integrity. To meet these requirements:
Each 2400 Series Call Box, Command Center, and outside phone line connect directly into the RATH Supervisor Board (2500__-SPRVSR). The 2500-__SPRVSR has a Communications Failure relay output that can be connected to an addressable fire alarm module or fire control panel.
Each IP Call Box, along with the Command Center, has a unique IP address that the 2500-VOIPM “pings” every 10 minutes to ensure connection. If power supervision is needed, an additional purchase of the UPS Monitor (2500-UPSMONITOR), which includes a Power Failure relay output, is required.

See product

IP Command Center System for 1-128 Call Boxes

Scalability: Whether it’s a single phone installation or multiple ones supporting up to 128 Call Boxes. Ideal for large installations such as university campuses, stadiums, hospitals, offices and large horizontal building layouts
Integration: Ideal for new construction, retrofit projects, or upgraded phone systems, the IP Command Center system can be seamlessly integrated into your existing network
Remote Management: Utilizing VOIP, the system enables voice communication over a network or internet connection, allowing for remote monitoring and control
Cost-Effectiveness: The IP System is more than just a communication tool; by leveraging your existing network infrastructure, the IP Command Center system offers a cost-effective solution without compromising on quality or compliance

Two-Way System Requirements

Systems shall provide communication in each required location with hands-free communication devices (2100 Series IP Call Boxes) and central control point or fire command center (IP Command Center Base Stations)

Emergency communication systems require 24/7 monitoring. If the central control point (IP Command Center Base Stations) is not a constantly attended location, the system shall have a timed automatic dial-out capability to an off-site monitoring or 911

All pathways between the remote call stations and the master control station shall be monitored for integrity. (360° Supervision)
Pathway survivability requirements state all circuits remain survivable (2 Hour Fire-Rated Cable) for at least the same time as the fire rating of the building

Primary/Secondary (IP Power Supply) must be monitored for the presence of voltage. Battery back-up power must be capable of operating on stand-by for 24 hours and subsequently for a period of 4 hours of system activation