Find your region


For countries not listed, see the Global site.

Note: Some products are available only in certain regions. Contact us regarding local availability.


IP Command Center 360° Supervision

Only available in
NFPA 72®
NFPA 72 2016 Supervision requirements state that pathways between the remote call stations and the master control station shall be monitored for integrity. To meet these requirements:
  • Each 2400 Series Call Box, Command Center, and outside phone line connect directly into the RATH Supervisor Board (2500__-SPRVSR). The 2500-__SPRVSR has a Communications Failure relay output that can be connected to an addressable fire alarm module or fire control panel.
  • Each IP Call Box, along with the Command Center, has a unique IP address that the 2500-VOIPM “pings” every 10 minutes to ensure connection. If power supervision is needed, an additional purchase of the UPS Monitor (2500-UPSMONITOR), which includes a Power Failure relay output, is required.
2500-VOIPM IP Supervisor

The RATH IP Supervisor allows supervision for up to 200 RATH IP endpoints (Phones and Command Center). The default system check is once every 10 minutes, but the time frame is adjustable. If the Supervisor does not detect one of the programmed IP endpoints or the network goes down, it will provide a contact closure alarm. Device includes Supervisor, relay output, and network cable.

Dimensions:  11-1/2″ H x 10″ W x 5″ D

Code Compliance:  UL 61010-1

Current Draw:  270mA

Output: (2) Form 1C SPDT switches, (1) NO and (1) NC. Rated 277vac at 20A
Ethernet: (2) 10 Base-T or 100 Base-T, 8-pin RJ45 connection
Network: Ethernet IPv4
• Requires static IP addresses for all components
• Supports web browser: HTTP/HTTPS, XML, Modbus/TCP & SNMP protocols
LED indicators: Green (power on) Yellow (network)
Temperature range:  -40°F – 150°F

Additional Features:
• Non-volatile memory
• Electromagnetic compliance: IEC CISPR 22, 24. FCC 47CFR15 (Class B)
Power Requirements:
• 120vac from a backed up power source or use RATH model RP7700104
Mounting: Wall mount enclosure with door

Warranty: 2 years


Dimensions:  5-1/4″ H x 3-1/8″ W x 2-5/8″ D

Power Requirements:
• 24vdc @ 28mA / 24vac @ 69mA
• 120vac @ 45mA / 230vac @ 36mA per module position

Polarized Coil Input(s): DC control inputs only

Energized Indicator: One red LED per module position

Contact Ratings:
• Resistive load: 7A @ 30vdc, 10A @ 125vac, 7A @ 250vac
• Inductive load: .25 HP 125/250vac (N.C.), .33HP 125/250vac (N.O.)

Contact Construction:  Dry form “C” DPDT per module position

Ambient Temperature:
• 32ºF to 120ºF (0°C to 49°C) @ 93% RH (@32°C)
• Non-Condensing / Non-Freezing

“/T” Versions:
• 3.5″ wide, low profile snap track provided with mounting screws

“/C” Versions:
Backbox: 18ga CRS, plated with 1/2″ conduit knockouts top and bottom
Cover Material: MR-101, MR-201: plastic ABS 94V-0 (“/C” Grey, “/C/R” Red) MR-104, MR-204: CRS 18ga (“/C” Grey, “/C/R” Red)


“T” versions: UL Recognized Component (UL864, UOXX2)File #S3403, CSFM File #7300-1004:106 “C” versions: UL Listed (UL864, UOXX), CUL Listed (UL864, UOXX7) File #S3403, CSFM File #7300-1004:101, MEA File #73-92-E Vol.14 (MR-101, MR-104), Vol. 16 (MR-201, MR-204) “C/R” versions: UL Listed (UL864, UOXX), CUL Listed (UL864, UOXX7) File #S3403, CSFM File #7300-1004:101, MEA File #73-92-E Vol. 22

Warranty: 2 years

Files and Resources

2500-VOIPM_IP Supervisor Data Sheet
RP8500VLC-2500-VOIPM_IP Supervisor Installation Manual
Install Guides
2500-UPSMONITOR_Uninterruptible Power Supply Monitor Data Sheet
2500-SPRVSR_Supervisor Board Installation Manual
Install Guides
2100-LTEGSM4-2_Cellular Gateway AT&T Data Sheet
2500-VOIPM_IP 360 Supervision System-CAD Drawing

Specifiers’ Corner

The Specifiers’ Corner is designed to provide Architects, Engineers, Contractors, Fire Marshals, Building Code Officials, Inspectors, AHJs, and end users with the essential information that may be needed for a project: Submittal Documents, Manuals/Wiring Diagrams, Data Sheets,CAD and Code Requirements

Contact info

You also can contact us through our phone number, our email address, and we’ll get back to you
Office Locations

Education, Training and Support

We believe that ongoing education is paramount to your professional development.

As the code and training experts, our website offers all the documentation and educational resources needed to assist you in making the right decisions.

Certified System Training Webinars
On demand Technical Training Webinars offer a convenient platform to educate your team on our products. Choose from Analog or IP communication systems
Lunch and Learn In Person
Lunch & Learn
Lunch & Learn Program
AIA Certified Area of Refuge Lunch & Learn program features scope and design, communication and code requirements. Available in person or remote.
Specifiers corner architect
Specifiers’ Corner
Designed to provide essential information that may be needed for a project: Submittal Documents, Manuals/Wiring Diagrams, Data Sheets and Code Requirements.