USA
Machine Room Unit
Only available in
Overview
The SmartView 2 Machine Room Unit provides the conversion from twisted pair to ethernet and POTS line and power to the SmartView 2 Elevator unit.
This is essential to the system for connectivity of audio / video to the outside world and power. The requirement of the system is one SmartView Machine Room unit to one SmartView 2 Elevator unit, without both in a system the SmartView 2 will not function.
Dimensions: 1.63″H x 6.10″ W x 4.25″ D
Code Compliance:
- Conforms to ASME Standard 17.1
- Certified to UL 62368-1
Power Requirements:
- 24vdc UL Rated Power Supply with a current rating of 1.66A or greater (Comes with 7100)
- Connections: Ethernet, USB, Telephone, Screw Terminals
Wiring Requirements:
- Plug 24vdc, 1.66A power supply into ‘POWER’ on device
- Plug Ethernet internet cable into ETH2 on device
- Plug telephone line RING and TIP into TEL IN
- Connect elevator phone and machine room device via PLC on both devices
- Note: All connections require attention to ensure correct polarity of positive (+) and negative (-). This also applies to RING and TIP on TEL IN
Environmental: 32° F to 122° F (0° C to 50° C)
Current Draw: Active=1A Idle=0.5A
Warranty: 2 years
Files and Resources
SVII 7100 Machine Room Unit
Datasheets
RATH SmartView Specifications
Specifications
Specifiers’ Corner
The Specifiers’ Corner is designed to provide Architects, Engineers, Contractors, Fire Marshals, Building Code Officials, Inspectors, AHJs, and end users with the essential information that may be needed for a project: Submittal Documents, Manuals/Wiring Diagrams, Data Sheets,CAD and Code Requirements
Contact info
You also can contact us through our phone number, our email address, and we’ll get back to you
Education, Training and Support
We believe that ongoing education is paramount to your professional development.
As the code and training experts, our website offers all the documentation and educational resources needed to assist you in making the right decisions.
