2500 Series SmartRescue Base Stations

Additional Compliance:

• • • Complies with Section 6.4 of UL 60950-1
    • Conforms to UL Standard 2017 for Attendant Monitored Signaling Devices
    • Volume control handset meets ADA requirements

Power Requirements:

• • • Requires a single analog (POTS, PBX, or central office phone line) or digital phone line. If used on an IP or cellular network, you must purchase an additional interface device from RATH
    • Designed for either 120vac power or 24vdc power

Wiring Requirements:

• Run twisted, shielded 4 wire set from each Call Box to SmartRescue and one standard phone line to the outside world

Phone Capabilities:

• Telephone Line Voltage: 24V-48V

Additional Features:

• • • Passively monitor communications between Call Boxes and the outside world via the LEDs: Solid lit LED indicates there is an emergency call in progress, slow blinking LED indicates there is a call on hold
    • Audible alert when Call Box initiates a call, silenced when call is joined from Base Station
    • Includes relay contact that trips if any Call Box has been activated
    • The SmartRescue is able to:
      • Call into all or individual Call Boxes as needed
      • Join existing conversations between Call Boxes and outside world
      • Hang up and original conversation will continue
      • Terminate outside world so it is only talking to the Call Boxes or terminate the call with all parties entirely
      • Built-in battery backup recharges from 120vac power (allows for a minimum of 4 hours talk time upon loss of power)
      • 16.8V 1400mAH battery (part # RP7300109A)

Warranty:

2 years