USA
OEM System – Alarm and Junction Board
Only available in
Overview
The OEM System – Alarm and Junction Board provides a simple, fully functional solution to meet the 2010 and 2013 ASME codes. The code states that each elevator phone needs to check for an active phone line at least once in a 24 hour period.
- The OEM System – Alarm and Junction Board checks the complete phone line system from the elevators to the machine room, and from the machine room to the outside world
- If an active phone line is not detected, an audible and visual alarm at the main landing panel is activated
- A key switch is used to silence the audible alarm
- If the phone line has not been re-established within a 24 hour period, the audible will resound
Communications Failure Annuciator
Alarm Board: 2″ H x 2.7″ W x 0.48″ D
Junction Board: 1.3″ H x 2.25″ W x 0.44″ D
Power Requirements: 24vdc required
Additional Features: OEM boards for mounting behind the panel include: LED (requires momentary key switch)
Warranty: 2 years
Files and Resources
2100-ALARM_Elevator Communications Failure Data Sheet
Datasheets
RP8500ALARM_Installation Manual
Install Guides
RATH Elevator Communication Failure Specifications
Specifications
Specifiers’ Corner
The Specifiers’ Corner is designed to provide Architects, Engineers, Contractors, Fire Marshals, Building Code Officials, Inspectors, AHJs, and end users with the essential information that may be needed for a project: Submittal Documents, Manuals/Wiring Diagrams, Data Sheets,CAD and Code Requirements
Contact info
You also can contact us through our phone number, our email address, and we’ll get back to you
Education, Training and Support
We believe that ongoing education is paramount to your professional development.
As the code and training experts, our website offers all the documentation and educational resources needed to assist you in making the right decisions.
