2100-VOIP2CS IP Interface

Dimensions:

• 1.12″ H x 4″ W x 4″ D

Additional Compliance:

• FCC Part 15 Class B Compliant

Interface Features:

• Allows up to (2) RATH 2100 series phones on an IP phone system
• Phone line verification included
• Install either in the machine room or a phone room
• Simple to configure to your customer’s IP system (requires a laptop)
• Can place a call on a Cisco Network or cloud based service provider
• Includes two FXS ports (one LAN and one WAN)

VoIP Protocols:

• SIP v2, SDP, RTP, and RFC 2833

Network Protocols:

• IPv4, TCP, UDP, DHCP, SNTP, STUN, HTTP, and PPPoE

Connections:

• FXS RJ11 and WAN RJ45 (10/100 BaseT)
• Power Consumption: 5w

Power Requirements:

• 120vac from a backed up power source or RATH® RP7700100

Wiring Requirements:

• Requires a standard copper run between the elevator phone and 2100-VOIP2CS
• Connect the elevator phone to 2100-VOIP2CS via a standard RJ11 jack and to SIP phone system via a standard RJ45 jack (maximum wire run of 300′ between 2100-VOIP2CS and Network Switch)

Environmental:

• 113°F

Warranty:

• 2 years